See also:

Number plate light
To change the bulb, proceed as follows: ❒ release the tab (A) and remove the cluster; ❒ turn the bulb holder (B) anticlockwise and remove the bulb (C). ...

Failure warning lights
Any failure is indicated by cluster warning light coming on together with the message on the reconfigurable multifunction display (where required) (see section “Warning lights and messages”). In ...

Boot light
To replace the bulb: 1) Remove the lens A-fig. 39 as shown by the arrow. 2) Open the bulb holder B and remove the bulb C (clipped in). ...