See also:
Jacking the vehicle
WITH THE JACK
See “If a tyre is punctured”, in this section.
The jack should only be used to change a wheel on the vehicle for which it
was designed. It should not be put to other uses or employe ...
Identification data
You are advised to note the identification codes. The identification data stamped
and given on the plates and their position are the following:
1 - Model plate
2 - Chassis marking
3 - Bodywork ...
Main beam headlights
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Cfig.
18 turning it counterclockwise;
2) Release clip A-fig. 19, remove connector B and remove the bulb C.
...


