Head restraints

See also:

Normal Starting
NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Turn the ignition switch to theAVV (START) position and release it when the e ...

Dipped beams
To change the halogen bulb, proceed as follows: 1) Remove the protection cover Bfig. 18 turning it counterclockwise; 2) Release clip A-fig. 20, remove connector B and remove the bulb C. ...

Personal Settings (Customer-ProgrammableFeatures)
Dimmer The EVIC display is provided with a light sensor capable of detecting environmental light conditions and adjusting the brightness of the instruments accordingly. NOTE: The brightness of th ...