See also:
Main beam headlights
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Cfig.
18 turning it counterclockwise;
2) Release clip A-fig. 19, remove connector B and remove the bulb C.
...
Emergency start-up
If the instrument panel warning light
stays on with fixed light, the emergency
start-up can be performed by using the CODE card code (see section “In an emergency”). ...
Cold Weather Operation
To prevent possible engine damage while starting at low temperatures, this vehicle
will inhibit engine cranking when the ambient temperature is less than –22° F (–30°
C) and the oil temperature se ...


