Alterations or repairs to the electric system not carried out correctly and
without taking into account the system specifications may cause failures and the
risk of fire.
See “If a bulb burns out” in this chapter for bulb type and power.
See also:
Heating
Proceed as follows:
❒ rotate knob (A) (pointer on ) completely
to the right;
❒ turn knob (C) to the required speed;
❒ move knob (D) to:
to warm the feet and at the same
...
Key without remote control
Key (A) (or (C) in alternative), delivered in two copies when the car is not
fitted with remote control, controls the following:
❒ the ignition switch;
❒ the door and boot locks;
...
Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h:
– disconnect connection A; turn counter-clockwise the cylinder to replace and
raise it; fit the new cylinder and turn it clockwise; connect conn ...