Understanding your instrument panel

See also:

Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h: Ц disconnect connection A; turn counter-clockwise the cylinder to replace and raise it; fit the new cylinder and turn it clockwise; connect conn ...

Additional checks
Every 1,000 km or before long journeys, check and top up if required: ❒ engine coolant fluid level; ❒ brake fluid level; ❒ windscreen washer fluid level; ❒ tyre pressur ...

Center High Mounted Stop Lamp (CHMSL)
1. Remove the two guard caps and the two fastening screws. 2. Remove the center high mounted stop lamp assembly. 3. Disconnect the electric connector. 4. Press the retaining device and open the bul ...