See also:

Engine starting
The car is fitted with an electronic engine lock device. If the engine fails to start, see paragraph “Fiat Code system” in section “Dashboard and controls”. ...

(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position. 2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the end of the hose. 3. Place the TIREFIT kit flat on the ...

High Beams
With the low beams activated, push the multifunction lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high bea ...