See also:

General instructions
– When a light is not working, check that it has not fused before changing the bulb. – For the location of the fuses, refer to “If a fuse blows” in this chapter. – Before replacing a bulb that doe ...

1. Glow Plug Light — If Equipped
The Glow Plug light will flash during engine oil viscosity sensor measurement in cold weather. During this measurement (up to 10 seconds), the starter will be disabled. If the measured oil visc ...

Cold Weather Operation
To prevent possible engine damage while starting at low temperatures, this vehicle will inhibit engine cranking when the ambient temperature is less than –22° F (–30° C) and the oil temperature se ...