This shows the temperature of the engine coolant fluid and begins working when the fluid temperature exceeds approx. 50°C.
Under normal conditions, the needle should hover around the middle of the scale according to the working conditions.
C - low engine coolant temperature.
H - excessive engine coolant temperature.
The turning on of the warning light (B) (on certain versions together with the message shown on the reconfigurable multifunction display) indicates that the coolant fluid temperature is too high; in this case, stop the engine and contact a Fiat Dealership.
If the needle reaches the red area, stop the engine immediately and contact a Fiat Dealership.
See also:
23. Anti-Lock Brake (ABS) Light
This light monitors the Anti-Lock Brake System (ABS). The light will turn on
when the ignition switch is turned to the ON/RUN position and may stay on for as
long as four seconds.
If the ABS li ...
Parking Brake
Before leaving the vehicle, make sure that the parking brake is fully applied.
Also, be certain to leave manual transmission in REVERSE or first gear.
The parking brake lever is located in the cent ...
Tire Identification Number (TIN)
The TIN may be found on one or both sides of the tire, however, the date code
may only be on one side. Tires with white sidewalls will have the full TIN, including
the date code, located on the wh ...