See also:

To close the bonnet
Proceed as follows: ❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess (D) replace it in its clip; ❒ lower the bonnet at approx. 20 cm from the engine ...

Technical specifications
VEHICLE IDENTIFICATION DATA CHASSIS MARKING fig. 1 It is printed on the passenger compartment floor, near the right-hand front seat. It can be reached by lifting the special flap in the carpeting an ...

Headlamps
1. Remove the plastic cap from the back of the headlamp housing. 2. Rotate the bulb counter-clockwise. 3. Remove the bulb and replace as needed. 4. Install the bulb and rotate clockwise to lock in ...