Headlights

ADJUSTING THE HEADLIGHT BEAM

The correct positioning of the headlight beams is very important for the comfort and safety, not only of the person driving the vehicle but also all other road users.

This is also covered by a specific law.

To ensure you and other drivers have the best visibility conditions when traveling with the headlights on, the headlights must be set properly.

Have the headlight positioning checked at a Fiat Dealership and adjusted if necessary.

SLANT COMPENSATION

The vehicle is fitted with an electrical device for correcting the headlight slant. The device can be operated with ignition key at MAR and dipped beams on.

When the vehicle is loaded, it slopes backwards. This means that the headlight beam rises. In this case, it is necessary to return it to the correct position.

Proceed as follows:

hold button B-fig. 139 pressed to increase by one position (e.g.: 0➟1, 1➟2, 2➟3);

hold button A pressed to decrease by one position (e.g.: 3➟2, 2➟1, 1➟0).

Display C shows the positions during the adjustment.

Correct positions as a function of the load

0 - one or two occupants in the front seats.

1 - five occupants.

2 - five occupants + load in boot.

3 - driver + maximum permissible load stowed in boot.

HEADLIGHT ADJUSTMENT ABROAD Check the headlight beam position every time you change the load to be carried.

HEADLIGHT ADJUSTMENT ABROAD

Headlights are orientated as to drive inside the country of origin before selling the vehicle. When traveling in countries with opposite driving direction, you need to cover the headlight areas according to the Road Code of the country you are traveling in.

    See also:

    Personal Settings (Customer-ProgrammableFeatures)
    Dimmer The EVIC display is provided with a light sensor capable of detecting environmental light conditions and adjusting the brightness of the instruments accordingly. NOTE: The brightness of th ...

    If an exterior light burns out
    For the type of bulb and power rating, see When needing to change a bulb. ...

    Set clock (Clock Adjust.)
    During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h). To set the clock (hours - minutes) proceed as follows: ...