The plate is applied on the inner side of the bonnet and it bears the following data:
A - Paint manufacturer.
B - Colour name.
C - Fiat colour code.
D - Respray and touch up code.
See also:
Front direction indicators
To change the bulb, proceed as follows:
1) Turn the bulb holder A-fig. 18 and remove it.
2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling).
...
Low battery charge
Turning the key to MAR the warning light on the dial turns on, but it should
go out as soon as the engine is started (with the engine running at idle speed a
brief delay in going out is allowed) ...
Extending the boot
Split seat
Before setting off, make sure that the seats in the direction of travel and perfectly
fastened to the anchoring. Only in this position can be seat belts be used correctly.
The boot can ...