See also:

Front direction indicators
To change the bulb, proceed as follows: 1) Turn the bulb holder A-fig. 18 and remove it. 2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling). ...

Starting procedure for petrol versions
1) Ensure that the handbrake is up. 2) Put the gear lever into neutral. 3) Press the clutch pedal fully down, without pressing the accelerator. 4) Turn the ignition key to AVV and let it go the mom ...

Extending the boot
Single rear seat Proceed as follows: ❒ fasten the seat buckles to the tabs on the seat back (as shown by arrows); ❒ check that the webbing (A) of each of the two side seat belts is ...