This function enables to select the unit of measure for fuel consumption (km/l, l/100 km or mpg) according to the previously set distance unit (km or mi, see previous paragraph “Distance unit”). To set this function proceed as follows:
See also:
Hill holder system
It is an integral part of the ESP system and facilitates starting on an uphill
slope. It is automatically activated in the following conditions:
❒ Uphill: vehicle stationary on a road with g ...
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...
Brake Assist System (BAS)
The BAS is designed to optimize the vehicle’s braking capability during emergency
braking maneuvers. The system detects an emergency braking situation by sensing
the rate and amount of brake appli ...