See also:

Center High Mounted Stop Lamp (CHMSL)
1. Remove the two guard caps and the two fastening screws. 2. Remove the center high mounted stop lamp assembly. 3. Disconnect the electric connector. 4. Press the retaining device and open the bul ...

Inflating procedure
Proceed as follows: ❒ Position the involved wheel with the inflation valve (A) set as shown in the figure, then pull up the handbrake; ❒ Screw the filler hose (B) to the cylinder ...

Rear light unit
To change the bulb, proceed as follows: ❒ from inside the car, remove the upper plastic cover (A) with the screwdriver provided to reach fastener (B); ❒ from inside the boot, fit ...