See also:

Controls
HAZARD LIGHTS They come on when switch r is pressed regardless of the position of the ignition key. When the device is on, the switch is flashing and warning lights Î and ¥ on the cl ...

Dipped beams
To change the halogen bulb, proceed as follows: 1) Remove the protection cover Bfig. 18 turning it counterclockwise; 2) Release clip A-fig. 20, remove connector B and remove the bulb C. ...

Brake Assist System (BAS)
The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sensing the rate and amount of brake appli ...