The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic.
1. Clean with a wet, soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean, damp rag.
2. Dry with a soft cloth.
See also:
Switching on/off of the ASR system
The ASR function switches on automatically each time the engine is started.
When travelling the device can be switched off and on again pressing switch ASR
OFF on the centre console.
Switching o ...
EOBD system
The EOBD system (European On Board Diagnosis) allows continuos diagnosis of the
components of the car correlated with emissions.
It also alerts the driver, by the turning on of the warning light
...
Engine Oil
Checking Oil Level
To assure proper engine lubrication, the engine oil must be maintained at the
correct level. Check the oil level at regular intervals, such as every fuel stop.
The best time to ...