This vehicle is equipped with a Brake Transmission Shift Interlock System (BTSI) that holds the shift lever in the PARK position when the ignition switch is in the LOCK/ OFF position. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON/RUN position (engine running or not) and the brake pedal must be pressed.
See also:
Device disengagement
Turn the ring (A) to OFF or the ignition key to STOP. The device is automatically
deactivated also in one of the following cases:
❒ pressing the brake or clutch pedal;
❒ ESP or ASR s ...
Panel Mode
Air comes from the outlets in the instrument panel.
Each of these outlets can be individually adjusted to direct the flow of air.
The air vanes of the center outlets and outboard outlets can be m ...
Main beam headlights
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Cfig.
18 turning it counterclockwise;
2) Release clip A-fig. 19, remove connector B and remove the bulb C.
...