Reverse instructions of the spare removal section.
Rotate the jack wrench tool on the winch drive nut clockwise until effort becomes heavy and an audible click is heard indicating the spare is properly stowed.
CAUTION!
The winch mechanism is designed for use with the jack wrench extension tool only. Use of air wrench or power tool may damage the winch.
See also:
Fan speed adjustment
Proceed as follows:
❒ open completely central vents and side outlets;
❒ turn knob (A) to the blue sector;
❒ slider (B) at ;
❒ turn knob (C) to the required speed;
...
Rear Tail, Stop, Backup And Turn Signal Lamps
1. Open the liftgate.
2. Remove the two screws and remove the tail lamp assembly.
3. Unsnap backplate and separate from the lamp housing.
4. Remove the tail, stop, or turn signal bulbs by pushing ...
Conditions of use
Cold starting
Short journeys and frequent cold starts do not allow the engine to reach optimum
operating temperature. This results in a significant increase in consumption levels
(from +15 to +30 ...