22. Electronic Stability Control (ESC) Activation /Malfunction Indicator Light

The ESC Activation/Malfunction Indicator Light in the instrument cluster will

The ESC Activation/Malfunction Indicator Light in the instrument cluster will come on for four seconds when the ignition switch is turned to the ON/RUN position. If the ESC Activation/Malfunction Indicator Light comes on continuously with the engine running, a malfunction has been detected in the ESC system. If this light remains on, see your authorized dealer as soon as possible to have the problem diagnosed and corrected.

• The ESC Off Indicator Light and the ESC Activation/Malfunction Indicator NOTE:

• The ESC Off Indicator Light and the ESC Activation/Malfunction Indicator Light come on momentarily each time the ignition switch is turned to ON/RUN.
• Each time the ignition is turned to ON/RUN, the ESC system will be on, even if it was turned off previously.

    See also:

    Battery
    The battery is of the “Limited maintenance” type: under normal conditions of use the electrolyte does not need topping up with distilled water. CHECKING THE CHARGE fig. 22 The battery charge may b ...

    5. High Beam Indicator
    This light indicates that the headlights are on high beam. Pull the turn signal lever toward the steering wheel to switch the headlights to low beam. ...

    Heated Seats — If Equipped
    On some models, the front driver and passenger seats may be equipped with heaters in both the seat cushions and seatbacks. The controls for the front heated seats are located on the center instrum ...