This light will turn on for four seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during starting, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information.
See also:
Brake Assist System (BAS)
The BAS is designed to optimize the vehicle’s braking capability during emergency
braking maneuvers. The system detects an emergency braking situation by sensing
the rate and amount of brake appli ...
Weights
(*) If special equipment is fitted (sunroof, tow hitch, etc.) the unladen car
weight increases, thus reducing the specified payload.
(**) Loads not to be exceeded. The driver is responsible for a ...
Ignition Key Removal
1. Place the shift lever in PARK (if equipped with an automatic transmission).
2. Turn the ignition switch to the ACC/ON/RUN position.
3. Rotate the key to the OFF/LOCK position.
4. Remove the key ...