This device can only work when the ignition key is at MAR.
The stalk can be moved to five different positions:
(A): windscreen wiper off
(B): flick wipe: on certain versions, turning the knurled ring (F), four possible
intermittent speeds are obtained (slowest to fastest).
With the stalk in position (B), turning the knurled ring (F), four possible intermittent speeds are obtained:
■ = very slow intermittent
■■ = slow intermittent
■■■ = intermittent medium
■■■■ = fast intermittent
(C): continuous slow;
(D): continuous fast;
(E): fast temporary (unstable position).
Operation in position (E) is limited to the time the lever is held in this position. When the lever is released, it returns to position (A) automatically stopping the wiper.
See also:
Fuel consumption
The fuel consumption figures given in the table below are determined on the basis
of the homologation tests set down by specific European Directives.
Consumption values are defined by means of the ...
Pollen filter
The pollen filter is located under the dashboard near the central dashboard unit
on passenger side.
If the vehicle is often used in dusty or extremely polluted environments, you
should change the ...
Adding Washer Fluid
The windshield washer fluid reservoir is located in the engine compartment, and
the fluid level should be checked at regular intervals. Fill the reservoir with
windshield washer solvent (not engin ...