EVIC Control Buttons

Press the MENU ESC button briefly to access the menu and/or go to next screen or to confirm the required menu option. Press and hold the MENU ESC button (approximately one second) to return to the main screen.

Press the + button to scroll upward through the displayed menu and the related options or to increase the displayed value.

Press the Ц button to scroll downward through the displayed menu and the related options or to decrease the value displayed.

situations: NOTE: Buttons + and Ц activate different functions according to the following situations:

Х To scroll the menu options upwards or downwards.
Х To increase or decrease values during settings.

clock and the miles or kilometers covered (for versions/markets, where provided) NOTE: When opening one of the front doors, the EVIC display will turn on the clock and the miles or kilometers covered (for versions/markets, where provided) for a few seconds.

    See also:

    Glow plugs
    Turning the ignition key to MAR, the warning light on the dial comes on and goes off when glow plugs reach the preset temperature. Start the engine immediately after warning light switching off. ...

    Incomplete door locking
    The warning light on the dial turns on (on certain versions together with the message on the display) when one or more doors, the boot (indication fitted on some versions only) or the bonnet ...

    Set clock (Clock Adjust.)
    During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h). To set the clock (hours - minutes) proceed as follows: ...