REPLACEMENT
Petrol versions
Loosen the screws on the side and on the air cleaner cover, remove the cover A-fig. 17 and remove the filtering element to be replaced.
1.9 Multijet versions
Loosen the three screws A-fig. 18 on the air cleaner cover, remove the cover B-fig. 19 and remove the filtering element C, to be replaced.
1.3 Multijet versions
Loosen the screws D-fig. 21, remove the cover E and remove the filtering element to be replaced.
See also:
GROUP 0 and 0+
Babies up to 13 kg must be carried facing backwards on a cradle seat, which,
supporting the head, does not induce stress on the neck in the event of sharp deceleration.
The cradle is restrained b ...
Troubleshooting
General
Sound Volume Low
The Fader function should be adjusted to the values “F” (front) only to prevent
the reduction in radio output power and the cancelling of the volume if the Fader
level a ...
Tailgate closing
To close, lower the tailgate until the lock clicks.
If the boot is not shut properly the warning light ´ comes on together with the
message on reconfigurable multifunction display (where prov ...