Fixed panel partition
Certain Fiat Doblò Cargo paneled versions fit a fully paneled partition.
Fixed partition with window
Certain Fiat Doblò Cargo paneled versions fit a fixed panel with central window through which stability of the load in the compartment can be checked.
Driver’s protection ladder
Certain Fiat Doblò Cargo versions fit a fixed ladder for protecting the driver if the load in the compartment is unstable.
Double ladder
Certain Fiat Doblò Cargo versions fit a split ladder for protecting the driving if the load in the compartment is unstable and allows to extend loading space on passenger side.
Fastening the ladder: Tip the seat as described previously, release the ladder C-fig. 57 from its housing using lever E and fasten it to handle Dfig.
58 on the seat. Make sure it is fastened well.
Releasing the ladder: press button E-fig. 59 to release the ladder from the handle D. Reposition the ladder in its original position. Tip the seat by lowering the cushion and lifting the seat back. Make sure that the seat is locked.
The ladder shall only be tilted with the vehicle stationary and the door open.
See also:
Start&Stop system and Gear Shift Indicator
With respect for the environment and fuel economy still in mind, the new
model implements a system called Start&Stop. Standard on all engines, this
device temporarily stops the engine and rest ...
Onboard Diagnostic System – OBD II
Your vehicle is equipped with a sophisticated onboard diagnostic system called
OBD II. This system monitors the performance of the emissions, engine, and automatic
transmission control systems. Wh ...
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...