The fuses of the car are grouped into two fuse boxes to be found respectively on the dashboard and in the engine compartment.
Fuse box on the dashboard
Loosen the two screws (A) and open the cover (B) to reach the fuses in the dashboard fuse box. Refer to the table on the following pages to identify the fuses.
Fuse box in the engine compartment
Loosen the retainers (A) and remove the cover (B). Refer to the table on the following pages to identify the fuses.
See also:
General Information
This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada.
Operation is subject to the following conditions:
• This device may not cause harmful
interference.
• This dev ...
Inflating procedure
Put on the protection gloves provided together with quick tyre repair kit.
– Pull up the handbrake. Loosen tyre inflation valve cap, take out the filler
hose A-fig. 16c and screw the ring nut B-fi ...
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...