The warning light on the dial turns on when the direction indicator control lever is moved downwards or, together with the right indicator, when the hazard warning light button is pressed.
See also:
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...
Clock mode (Clock Mode)
This function is used to set the clock in the 12h (12 hour) or 24h (24 hour)
mode. To adjust proceed as follows:
...
Panel Mode
Air comes from the outlets in the instrument panel.
Each of these outlets can be individually adjusted to direct the flow of air.
The air vanes of the center outlets and outboard outlets can be m ...