If the instrument panel warning light
stays on with fixed light, the emergency
start-up can be performed by using the CODE card code (see section “In an emergency”).
See also:
Main beam headlights
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Cfig.
18 turning it counterclockwise;
2) Release clip A-fig. 19, remove connector B and remove the bulb C.
...
Engine marking
Engine marking is stamped on the crankcase on gearbox side and includes the model
and the chassis number. ...
Spare Tire Stowage
Reverse instructions of the spare removal section.
Rotate the jack wrench tool on the winch drive nut clockwise until effort becomes
heavy and an audible click is heard indicating the spare is prop ...