The rear seatbacks have a fold down feature to allow increased cargo capacity.
Push down the release button, located at the outboard top of the seatback and move the seatback to its foldeddown position to provide a flat load floor cargo area.
When returning the seatback to its upright position, push rearward until the seatback is properly latched.
Rear Seat Release
Buttons
Folded Rear Seats
See also:
Stopping the engine
Turn the ignition to STOP while the engine is idling. IMPORTANT After a taxing
drive, you should allow the engine to “catch its breath” before turning it off by
letting it idle to allow the temper ...
Preparations For Jump-Start
The battery in your vehicle is located on the left side of the engine compartment.
Positive Battery
Post
1 — Positive Battery
2 — Negative Battery Post
WARNING!
• Take care to avoid the ra ...
General instructions
– When a light is not working, check that it has not fused before changing the
bulb.
– For the location of the fuses, refer to “If a fuse blows” in this chapter.
– Before replacing a bulb that doe ...


