Turn Signals

Push the multifunction lever upward to signal a right turn or downward to signal a left turn. The corresponding indicator in the instrument cluster will blink to indicate the operation of the turn signal.

Turn Signal Operation
Turn Signal Operation

and the steering wheel is returned to a straight position. NOTE: The indicators will automatically turn off when the turn has been completed and the steering wheel is returned to a straight position.

    See also:

    Third brake lights
    To replace a bulb, open either the left-hand door or the tailgate and loosen the screws A-fig. 31. Remove the lens from its housing from the outside. Remove the clipped-on bulb B-fig. 32 and repla ...

    Engine oil
    1.28V versions 1.3 Multijet versions Checking engine oil Check the oil level a few minutes (about 5) after the engine has stopped, with the car parked on level ground. Check that the level i ...

    Snow chains
    Use of snow chains should be in compliance with local regulations. Snow chains should only be applied to the driving wheels (front wheels). Refer to the following table for information on the wheel ...