Memory Feature

The driver seat also has a memory feature, which can operate in two ways:

Memory Function Option 1) Ч Full Seat Back And Track Fore/Aft Position Memory: After using the EZ entry function, the

After using the EZ entry function, the seatback angle and the Track fore/aft adjuster can both re-lock into the position they were most recently adjusted to. This is accomplished if the seat is moved fully rearward to its last fore/aft position on the tracks before the seat back is returned upright.

Memory Function Option 2) Ч Seat Back Only Memory:

After using the EZ entry function, the seat back may first be returned upright prior to going back to the last fore/aft (memory) position on the tracks. This results in the seat back memory being set only Ц The track will then be locked forward of its last set fore/aft memory position.

To then reset the fore/aft track memory feature (to reestablish memory function option 1), the seat has to be returned fully rearward to its last fore/aft memory track position as described in Memory function option 1).

    See also:

    General Information
    Х You can launch the vehicle from a stop in first, second, or third gear. The system will ignore attempts to shift into a higher gear if the engine speed is too low. An audible beep will sound if ...

    Failure warnings
    In case of parking sensor failure, the driver is warned when engaging reverse by high sound warning (for 3 seconds). ...

    Roof rack/ski rack
    PRESETTING To use the roof racks you shall remove the caps set in points fig. 136. Attach the roof rack bar brackets to the fasteners. IMPORTANT Always follow the instructions provided with the ki ...