Modifications or repairs to the electrical system carried out incorrectly
and without bearing the features of the system in mind can cause malfunctions with
the risk of fire.
See “If a bulb burns out” in this chapter for bulb type and power.
See also:
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...
Rear fog lights
(amber)
The warning light turns on when the rear fog lights are turned on. ...
Direction indicators
Front
To change the bulb, remove the protective cover (3), turn connector (A) clockwise
and remove the bulb (B).
Side
To change the bulb, proceed as follows:
❒ Press the lens (A) in t ...