This vehicle has a safety belt system with an Energy Management feature in the front seating positions to help further reduce the risk of injury in the event of a head-on collision. This safety belt system has a retractor assembly that is designed to release webbing in a controlled manner. This feature is designed to help reduce the belt force acting on the occupant’s chest.
See also:
Tire Spinning
When stuck in mud, sand, snow, or ice conditions, do not spin your vehicle’s
wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without
stopping when you are stuck.
Re ...
Cylinder replacement procedure
To replace the cylinder proceed as follows fig. 16h:
– disconnect connection A; turn counter-clockwise the cylinder to replace and
raise it; fit the new cylinder and turn it clockwise; connect conn ...
8. Generic Warning Light
The Generic Warning Light will illuminate if any of the following conditions
occur: Oil Change Request, Engine Oil Pressure Sensor Failure, External Light Failure,
Fuel Cut-Off Intervention, Fue ...