The display gives information according to the set unit (km or mi). To select the required distance units, proceed as follows:

See also:
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...
Interior equipment
GLOVE BOX fig. 95
Operate handle A as shown by the arrow to open the compartment.
MAGNETIC CARD POCKET - TICKET POCKET fig. 96 (where provided)
Slots for keeping magnetic cards (telephone cards, ...


