Cruise control

Turning the ignition key to MAR, the warning light

Turning the ignition key to MAR, the warning light shall turn on but it should go off after a few seconds.(if present) on the instrument panel shall turn on but it should go off after a few seconds.

The warning light on the dial comes on (on certain versions together with the message on the display), with the knurled ring of the cruise control in the ON position, when the device starts to intervene on the engine.

    See also:

    8. Generic Warning Light
    The Generic Warning Light will illuminate if any of the following conditions occur: Oil Change Request, Engine Oil Pressure Sensor Failure, External Light Failure, Fuel Cut-Off Intervention, Fue ...

    14. Electronic Throttle Control (ETC) Light
    This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected, the light will come on while the engine is running. Cycle the ignition key when t ...

    Interiors
    Periodically check that water is not trapped under the mats (due to water dripping off shoes, umbrellas, etc.) which could cause oxidisation of the sheet metal. CLEANING SEATS AND FABRIC AND VELVET ...