How to warm up the engine after it has just started (petrol and diesel versions)

Proceed as follows:

❒ Drive off slowly, letting the engine turn at medium revs. Do not accelerate abruptly;
❒ Do not drive at full performance for the initial kilometres. Wait until the coolant temperature gauge starts moving.

    See also:

    Dipped beams
    To change the halogen bulb, proceed as follows: 1) Remove the protection cover Bfig. 18 turning it counterclockwise; 2) Release clip A-fig. 20, remove connector B and remove the bulb C. ...

    Glow plugs
    Turning the ignition key to MAR, the warning light on the dial comes on and goes off when glow plugs reach the preset temperature. Start the engine immediately after warning light switching off. ...

    Front Fog Lights — If Equipped
    The fog light switch is located on the center stack of the instrument panel, just below the radio. Fog Light Switch Press the switch once to turn the front fog lights on. Press the switch a sec ...