❒ Scheduled maintenance programme intervals.
❒ Trip computer information.
❒ Light adjustment of graphics/index/instrument cluster display and twozone climate
control system (where provided).
❒ Display of failure/warning/function activation messages.
❒ Headlight aiming position display (with dipped beam headlights on) (E).
❒ Repetition of audio info.
There is also a menu enabling to perform the following adjustments and/or settings using the control buttons (see previous pages):
See also:
Preparations For Jacking
1. Park the vehicle on a firm level surface, avoiding ice or slippery areas.
WARNING!
Do not attempt to change a tire on the side of the vehicle close to moving
traffic, pull far enough off the r ...
Diesel engines
Use diesel fuel for motor vehicles complying with European specifications
EN590 only. The use of other products or mixtures may damage the engine beyond repair
and invalidate the warranty. If th ...
Front direction indicators
To change the bulb, proceed as follows:
1) Turn the bulb holder A-fig. 18 and remove it.
2) Remove bulb by pushing it slightly and turning it anticlockwise (bayonet coupling).
...