NOTE: The proper cold tire inflation pressure is listed on the driver’s side
B-Pillar.
Tire Placard Location
See also:
Spare Tire Removal
The spare tire is stowed to the underbody below the cargo area.
1. Remove the plug located in the rear cargo area.
Winch Access Plug
2. Fit the wrench tool over the drive nut. Use the wrench to ...
Boot light
To replace the bulb:
1) Remove the lens A-fig. 39 as shown by the arrow.
2) Open the bulb holder B and remove the bulb C (clipped in).
...
Ignition Key Removal
1. Place the shift lever in PARK (if equipped with an automatic transmission).
2. Turn the ignition switch to the ACC/ON/RUN position.
3. Rotate the key to the OFF/LOCK position.
4. Remove the key ...