See also:

Inflating procedure
Proceed as follows: ❒ Position the involved wheel with the inflation valve (A) set as shown in the figure, then pull up the handbrake; ❒ Screw the filler hose (B) to the cylinder ...

(A) Whenever You Stop To Use TIREFIT
1. Pull over to a safe location and turn on the vehicle’s Hazard Warning flashers. 2. Verify that the valve stem (on the wheel with the deflated tire) is in a position that is near to the ground. ...

Annual inspection schedule
For cars with an annual mileage of below 20,000 km (for example about 15,000 km) the following yearly inspection programme is advised: ❒ check tyre conditions/wear and adjust pressure if req ...