With the low beams activated, push the multifunction lever towards the instrument panel to turn on the high beams. Pull the multifunction lever toward the steering wheel to turn off the high beams.
See also:
Using the seat belts
The belt should be worn keeping the chest straight and rested against the seat
back.
Take hold of the tongue A-fig. 6. Insert it into the buckle B, until you hear
it clicks.
At removal, if it ja ...
Daytime Running Lights — If Equipped
To activate the Daytime Running Lights (DRL), rotate the end of the multifunction
lever to the O symbol.
NOTE: The low beams and side/taillights will not be on with DRL.
The DRL function can be t ...
1. Glow Plug Light — If Equipped
The Glow Plug light will flash during engine oil viscosity sensor measurement
in cold weather.
During this measurement (up to 10 seconds), the starter will be disabled. If
the measured oil visc ...