Manual adjustment from the outside fig. 65
Open the window and move mirror A directly with your hands.
Manual adjustment from the inside fig. 66
Turn knob A from inside the vehicle.
If the mirror makes it difficult to get through narrow gaps, fold it from position 1 to position 2.
Electrical adjustment fig. 67
This operation is only possible with ignition key at MAR.
Press switch A in the four directions to adjust the mirror as required.
Use switch B to select the mirror (left-hand or right-hand) you want to adjust.
You should adjust the mirrors when the vehicle is stationary and with the handbrake engaged.
The electrical mirror demisting device will be switched on automatically with the heated rear window.
See also:
Dipped beams
To change the halogen bulb, proceed as follows:
1) Remove the protection cover Bfig.
18 turning it counterclockwise;
2) Release clip A-fig. 20, remove connector B and remove the bulb C.
...
Dipped beam headlights
To change the bulb, remove the protective cover (2), release the catch (A) and
remove the bulb (B). ...
Seat Bel
Inspect the belt system periodically, checking for cuts, frays, and loose parts.
Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Front seat belt assemblies must ...