The power mirror controls are located on the driver’s door trim panel.
Power Mirror Switches
The power mirror controls consist of a mirror select switch and a four-way mirror control switch. To adjust a mirror, press the mirror select switch to either the L (left) or R (right) to select the mirror you need to adjust.
Using the mirror control switch, press on any of the four arrows for the direction that you want the mirror to move.
WARNING!
Vehicles and other objects seen in the passenger side convex mirror will look smaller and farther away than they really are. Relying too much on your passenger side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in the passenger side convex mirror.
See also:
TIREFIT Kit Components And Operation
1. Sealant Bottle
2. Deflation Button
3. Pressure Gauge
4. Power Button
5. Mode Select Knob
6. Sealant Hose (Clear)
7. Air Pump Hose (Black)
8. Power Plug
Using The Mode Select Knob And Hose ...
Inflating procedure
Proceed as follows:
❒ Position the involved wheel with the inflation valve (A) set as shown in the
figure, then pull up the handbrake;
❒ Screw the filler hose (B) to the cylinder ...
Technical specifications
VEHICLE IDENTIFICATION DATA CHASSIS MARKING fig. 1
It is printed on the passenger compartment floor, near the right-hand front seat.
It can be reached by lifting the special flap in the carpeting an ...