Adjusting the reclining seat back
Lift lever A-fig. 52.
See also:
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...
Important notes
As far as possible avoid sharp braking and screech starts.
Be careful not to hit the kerb, potholes or other obstacles hard. Driving for
long stretches over bumpy roads can damage the tyres.
Perio ...
With map reading lights
Press switch A-fig. 90 to switch the lights on and off.
Switch B operates the map-reading light.
According to the position, you can have the following conditions:
– switch A pressed at the centre ...