Vehicle protection system failure -Fiat code

(amber)

(amber)

Turning the key to MAR the warning light shall flash only once and then go off.

If with the ignition key at MAR, the warning light stays on, this indicates a possible failure (see “Fiat Code system” in section “Dashboard and controls”).

IMPORTANT

The turning on at the same time of the warning lights CODE system. and Y indicates a failure of the Fiat CODE system.

If with the engine running the warning light is not protected by the engine inhibitor device (see “Fiat Code system” in section flashes, this means that the vehicle is not protected by the engine inhibitor device (see “Fiat Code system” in section “Dashboard and controls”).

Contact Fiat Dealership to have all the key memorized.

    See also:

    Glow plugs
    Turning the ignition key to MAR, the warning light on the dial comes on and goes off when glow plugs reach the preset temperature. Start the engine immediately after warning light switching off. ...

    Key-In-Ignition Reminder
    Opening the driver’s door when the key is in the ignition and the ignition switch position is OFF/LOCK, sounds a signal to remove the key. ...

    To Activate
    Push the ON/OFF button. The Cruise Indicator light in the instrument cluster will illuminate. To turn the system off, push the ON/OFF button a second time. The Cruise Indicator light will turn off ...