Device disengagement

Turn the ring (A) to OFF or the ignition key to STOP. The device is automatically deactivated also in one of the following cases:

❒ pressing the brake or clutch pedal;
❒ ESP or ASR systems cut-in (where provided);
❒ gearshifting in versions with Dualogic automatic transmission (where provided);
❒ unvoluntarily moving the Dualogic lever (where provided) to (N).

WARNING

When travelling with the device on, do not put the gearbox lever in neutral and do not shift the Dualogic gearbox lever (where provided) to (N).

WARNING

In the event of device malfunction or failure, turn the knurled ring (A) to OFF and contact a Fiat Dealership after checking the protective fuse integrity.

    See also:

    To reduce memorised speed
    The speed memorised can be increased in two ways: ❒ disengaging the device and then memorising the new speed; or ❒ keeping the ring (B) pressed at (–) until reaching the new speed whi ...

    To close the bonnet
    Proceed as follows: ❒ hold the bonnet up with one hand and, with the other, remove rod (C) from recess (D) replace it in its clip; ❒ lower the bonnet at approx. 20 cm from the engine ...

    To Deactivate
    A soft tap on the brake pedal, pushing the CANC button, or normal brake pressure while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory. Pressing t ...