Fan speed adjustment

Proceed as follows:

❒ open completely central vents and side outlets;
❒ turn knob (A) to the blue sector;
❒ slider (B) at ❒ turn knob (C) to the required speed;;
❒ turn knob (C) to the required speed;
❒ turn knob (D) to Recirculation.

    See also:

    Boot light
    To replace the bulb: 1) Remove the lens A-fig. 39 as shown by the arrow. 2) Open the bulb holder B and remove the bulb C (clipped in). ...

    Engine coolant fluid
    The coolant level shall be checked with cold engine and shall be included between the MIN and MAX mark on the reservoir. If the level is low, pour slowly a mixture of 50% distilled water and 50 ...

    Key-In-Ignition Reminder
    Opening the driver’s door when the key is in the ignition and the ignition switch position is OFF/LOCK, sounds a signal to remove the key. ...