During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h).
To set the clock (hours - minutes) proceed as follows:
See also:
Exit menu (Exit Menu)
This is the last function that closes the circular setting cycle listed in the
initial menu screen.
Start of journey procedure (reset)
To start a new journey monitored by the “General trip”, wit ...
Low battery charge
(red)
Turning the ignition key to MAR the warning light turns on, but it should go
out as soon as the engine is started (with the engine running at idle speed a brief
delay in going out is allo ...
(B) Setting Up To Use TIREFIT
1. Turn the Mode Select Knob (5) to the Sealant Mode position.
2. Uncoil the Sealant Hose (6) and then remove the cap from the fitting at the
end of the hose.
3. Place the TIREFIT kit flat on the ...