Display info

❒ Headlight aiming position display (only with dipped beams on) (A)

❒ Headlight aiming position display (only with dipped beams on) (A)
❒ Clock (B) (always displayed, also with key removed and front doors closed).
❒ Total (C) and partial (D) odometer.

With ignition key removed, when opening one of the front doors the display comes on showing the clock and the odometer indication. If the “Follow me home” function is on (see paragraph “Follow me home” in this section), the display will show the time the function is on instead of the mileage recorder indication (see figure).

Warning light check function

The instrument panel performs a check on the following warning lights:

The instrument panel performs a check on the following warning lights:

❒ handbrake on/low brake fluid level;
❒ ABS and EBD system;
❒ ESP system on/failure;
❒ “Dualdrive” (where provided) electric power steering failure.

Warning light check is performed automatically when turning the ignition key to MAR and during normal operation if a failure is detected. When the initial check is over, the message LEd Error will flash on the display for about 10 seconds to warn the driver that a failure has been detected (on one or more warning lights).

    See also:

    Brakes
    SERVICE AND EMERGENCY BRAKES Front: – disc, floating shoe, self-ventilated. Rear: – drum, self-centering calipers. Crossed hydraulic circuit control. Vacuum brake booster. ABS system with four ...

    CO2 emissions
    The CO2, emission levels at the exhaust given in the following table refer to combined consumption. CO2 emissions according to Directive 1999/100/EC (g/km) Petrol engines Diesel engines &nbs ...

    To reset the memorised speed
    If the device has been disengaged for example pressing the brake or clutch pedal, the memorised speed can be reset as follows: ❒ accelerate gradually until reaching a speed approaching the o ...