Fiat 500

Fiat 500

Fiat 500

See also:

Boot light
To replace the bulb: 1) Remove the lens A-fig. 39 as shown by the arrow. 2) Open the bulb holder B and remove the bulb C (clipped in). ...

Set clock (Clock Adjust.)
During setting, the clock is displayed in 24h mode regardless of the set clock mode (12h/24h). To set the clock (hours - minutes) proceed as follows: ...

Emergency start-up
If the Fiat CODE system fails to deactivate engine immobilising system the warning lights Yand U stay on and the engine cannot be started. To start the engine the emergency start-up can be performe ...