NOTE: Perchlorate Material – special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate The recommended replacement battery is CR2032.
1. Press the mechanical key release button and release the mechanical key to access the battery case screw located on the side of the Key Fob.
Mechanical Key
Release Button
2. Rotate the screw located on the side of the Key Fob using a small screwdriver.
Key Fob Screw Location
3. Take out the battery case. Remove and replace the battery observing its polarity
Battery Case Removed
4. Refit the battery case inside the Key Fob and turn the screw to lock it into place.
See also:
Driving Through Water
Driving through water more than a few inches/ centimeters deep will require extra
caution to ensure safety and prevent damage to your vehicle. ...
Starting Procedures
Before starting your vehicle, adjust your seat, adjust both inside and outside
mirrors, and fasten your seat belts.
WARNING!
Never leave children in the vehicle alone. Leaving unattended children ...
Jump starting
If the battery is flat, it is possible to start the engine using an auxiliary
battery with the same capacity or a little higher than the flat one.
Proceed as follows:
❒ Connect positive ter ...


